The blasting robot, the perfect solution for steel surfaces on the ceiling, wall, or floor. Small and maneuverable, the torboMate even gets into hard-to-reach corners and easily drives over many bumps. The device adheres magnetically to the substrate and is conveniently operated with a remote control.
It works safely and quickly without scaffolding, even at high altitudes. A safety plus for your employees. It guarantees lower costs, because there is no need for equipment or long preparation times.
The torboMate is the robot for all larger steel surfaces, for example on steel hulls in the offshore or petrochemical sector. Thanks to its small format, it makes blasting work possible in many cases.
It can be equipped with one or two blasting nozzles or a high-pressure nozzle up to 4,000 (58 psi) bar (depending on the design of the guide arm).
|Area coverage||up to 72 m²/h (86 yd²/h)|
|working width||1.600 mm (63 inch)|
|Drive power||1,0 - 1,5 kW|
|Control /Speed||Electric / 0,5 - 20 m/min (0,55 - 22 yd/min.)|
|Overall weight||45 kg (99 lbs)|
|Plug||200 Volt / 50 Hz / 16 Amp|
|Dimensions (L x W x H), approx.||650 x 620 x 550 mm (25,6 x 24,4 x 21,7 in)|
|Crawler||24 V DC or compressed air control|
|Area of application||Vertical and/or horizontal steel surfaces (min 5 mm)|